PHOTOCELLS


PUSHBOTTON STATIONS


KEY SWITCHES

LOOP DETECTORS

ELECTRIC DOOR STRIKE


Electric Door Strike
Code: Description:
SD-995C Fail-secure or Fail-safe, 12VDC for Metal Doors
Electric Door Strike. 12VDC for metal doors.
Field-programmable for fail-safe/fail-secure
operation.
Reversible, non-handed. 2,000 lb Jaw Strength.
SD-995C24 Fail-secure or fail-safe, 24VDC for Metal Doors.
Electric Door Strike for metal doors. 24VDC.
Fail-safe (door unlocks when power is lost) or
fail-secure (door locks when power is lost) operation.
Indoor use only.
ELECTROMAGENETIC GATE LOCK


Face Mounting
Code: Description:
E-942FC-600 600-lb Holding Force, Face Mounting, UL
. Face mounting. For indoor & outdoor applications.
. For sliding or swinging gates. Water resistant and
. vandal resistant. Maintenance-free, factory-sealed
. design. Dual-threaded conduit fitting. Attractive
. stainless-steel housing. 3ft (91cm) Hookup cord.
. Dual voltage: 12/24 VDC operation. No residual
. magnetism. MOV Surge protection.
. Complete mounting hardware included.
. Fail-Safe - Unlocks on power failure.
. "L" and "Z" brackets available. "UL," "CE," "RoHS"

Face or Surface Mount
Code: Description:
E-946FC-1K2Q 1,200-lb Holding Force, Face or Surface Mount, UL
. Face and surface mounting.
. For indoor & outdoor applications.
For sliding or swinging gates. Water resistant and
. vandal resistant. Maintenance-free, factory-sealed
design. Dual-threaded conduit fitting. Attractive
stainless-steel housing.6-1/2 ft (2m) Hookup cord.
Dual voltage: 12/24 VDC Operation. No residual
magnetism. MOV Surge protection.
Fail-Safe operation - unlocks on power loss
Complete mounting hardware included
"L" and "Z" brackets available.
"UL" (listed), "CE," and "RoHS"
ELECTROMAGNETIC MOUNTING BRACKETS


Electromagnetic “Z” Brackets
Code: Description:
E-942F-600/Z "Z" 600 Lbs. Bracket for mounting E-942FC-600
and E-946FC-600. Mounts to armature plate.
For use with swinging gates.
E942FC-1300/ZQ "Z" 1,300 Lbs. Bracket for mounting E-942FC-1300
and E-946-FC-1K2Q. Mounts to armature plate.
For use with swinging gates.
RECEIVERS


OTHER RECEIVERS

1-Channel Receiver (DELTA-3)
Code: Description:
DNR00101 Auto voltage sensing - no jumpers to set.
Single Form ”A” (normally open) relay
rated at 30 Volts AC/DC up to 5 Amps.
Supplied with whip antenna, three feet
of coaxial cable, and bulkhead connector.
Power: 12 - 30 VAC or 10.5 - 30 VDC.
Codes: 256 (set by dip switches).
RF frequency: 310 MHz.
Dimensions: 3.625" W x 5.25" H x 1.5" D.